Installation Guide

Shed Assembly Instructions (Pent):

1. Ensure base area is firm, level and even.

2. Lay floor down, making sure base sits comfortably and is not twisted.

3. Fix Gable End to Back Wall (on the base) using screws, ensuring joint is snug:

   

4. Fix other Gable End to Pent Back with screws:

5. Fix Window / Door Section to both Gable Ends using screws:

6. Square the shed up, lay the Roof Section in places, and join Roof Section to shed carcass with screws:

   

7. Square up the whole shed and roof, then secure the Roof Section with screws. Screw entire shed to the Floor Section.

8. Carefully tack on the Roof Felt, making sure any overlaps are facing downwards, and trim off excess felt.  Secure felt finally by nailing Facia Boards onto ends.

Shed Assembly Instructions (Apex):

1. Ensure base area is firm, level and even.

2. Lay floor down, making sure base sits comfortably and is not twisted.

3. Fix Gable End to Back Wall (on the base) using screws, ensuring joint is snug:

   

4. Fix Door Section to sidewall with screws:

5. Fix Window Section to both Gable Ends using screws:

6. Square the shed up, lay the Roof Section in places, and join Roof Sections together with screws:

   

7. Square up the whole shed and roof, then secure the Roof Section with screws. Screw entire shed to the Floor Section.

8. Carefully tack on the Roof Felt, making sure any overlaps are facing downwards, and trim off excess felt.  Secure felt finally by nailing Facia Boards onto ends.